Keepburning Zizi Cosmic Ring

Vendor: Keepburning

The Keepburning Zizi Cosmic Ring

The Keepburning Zizi Cosmic Ring

Construction

The Cosmic Ring is shaped like an eight. Both ends are 20mm thick and the material gets thinner to 7mm in the middle onto which Zizi rocket logo is wrought. Both holes have a diameter of 26mm. Being made out of TPR the holes can be stretched to accommodate even quite large dicks yet fit snug enough even for smaller dicks and smaller or tighter balls. Another benefit of TPR is, that it is resistant towards body fluids and most lube so even out of a sleazy group scene where silicone-based, water-based and fat-based lubes mixed it came out in top shape.

Playing with it

Even though it looks quite different than the Oxballs Trough I had the same question when I got this toy from Mister B: What am I supposed to do with this toy? But after playing around with it a couple of times it became a regular in my play.

Side view showing the difference in thickness between the ends and the middle bridge.

Side view showing the difference in thickness between the ends and the middle bridge.

Like the Oxballs toy is enhance the masturbation experience: Put one hole around your dick and the other one around your balls and the stroking movement will be transferred to your balls. Since the bulge at the back of the balls is a bigger than the one of the Trough the bouncing sensation is greater. If you get off bouncing rather than additional prostate stimulation I would recommend this toy as improving your self-pleasuring. Due to the more compact design it can also be worn and used without any problems when wearing a jockstrap of codpiece gear.

The stretchiness makes the Cosmic Ring also a versatile cock toy: Take both rings and wear it either as a cockring or a ball stretcher. Because one side of the package is 40mm high and the other one only 7mm depending which side you put in front of it either pushes your dick up or down and will let your ball bounce more freely or encourages slapping against your thighs when jerking off. Due to the bulges in either of the three configurations the separation between a silicone loop around the base of the junk and the balls is large and stable enough without having to short-circuit your box when the sub wiggles.

Example of doubling up the Cosmic Ring

Example of doubling up the Cosmic Ring

This is extremely handy since not everyone has as low hangers as I have thus making the Zizi Megamen or Oxballs Nuttsling too uncomfortable in the first place. On the other hand: If you have really low hangers and the Nuttlsing or Megamen is too short, due to the relatively large additional stretch the Cosmic Ring helps make cockslings even interesting for people who otherwise wouldn’t feel any stretch at all.

A weird form of play I have witness at a group scene: The connection of people. Some just put one ring around one dick and the other around another one. One transferred the stroking sensation onto the balls of another and I found a couple who was into docking (putting your glans under the foreskin of another person) and they put the holes behind their glans thus pumping them up a bit. I have to admit I don’t get this form of play but was glad to see them getting pleasure from the Cosmic Ring. This scene also dissipated some doubts if the rather frail looking bridge between the holes would withstand the tension which it did. I still wouldn’t put too much stress onto it too often. But then this toy isn’t too expensive if it breaks.

Conslusion: Versatile and gear-friendly masturbation toy.
Pro Cons Where to get Price
Great for wearing under codpiece gear and jocks Middle part seems a bit frail Keepburning(Manufacturer) 16,90€
Versatile
Resistant towards sweat, piss and most lubes

Keepburning Zizi Megamen

Vendor: Keepburning

The Megamen Cocksling. Notice the different long tubes which make for a different sensation depending which way you put it on.

The Megamen Cocksling. Notice the different long tubes which make for a different sensation depending which way you put it on.

As you might know I like a good pair of bouncy balls when jerking, fucking or just walking around (even though for that I prefer a bit more weight). Earlier this year I reviewed my favorite ball stretcher the Oxballs Nuttsling. Back then I already wanted to compare it to the Keepburning Megamen cocksling but couldn’t get my hand on one just in time. I was especially curious because Oxballs is a ball toy maker who ventured into ass toys while Keepburning is know for their high quality ass toys and now makes toys for your junk. A couple of weeks ago Mister B sent me this toy so I can finally write the review I have been waiting for over half a year.

Construction

Like all dick and balls toys of this kind the cocksling is made out of relatively thin TPR making it very flexible. You can get this toy in 8 colors so even the most fashionable sub get the shade which he thinks will festoon his junk best.

Detail of the reinforcement of the opening holes.

Detail of the reinforcement of the opening holes.

The basic form of this toy is like the letter T. The main body is trapezoid thus following the anatomy of an erected dick. The tubes coming out of both horizontal sides of the main body are 9mm and 13mm long. The perpendicular tube provides 22mm of stretch and has a diameter of 35mm. All opening holes are reinforced with three thin rings which provide a bit snuggier fit.

Playing with it

Believe it or not this toy was one of the most debated one between my testees and me; naturally since it was up against one of my favorite and most often used toys…

Even more than the Oxball stretcher this one is made for really long term wear. Providing less stretch with a larger diameter there is less stress on your sack neck. So if you have tighter balls or just if you just want the kink feeling of having something on your body which doesn’t have too much of an effect this is the right stretcher for you. I have worn this toy for three days and to three full workout cycles to the gym, rode a bike several times and it didn’t bother me at all. The TPR is resistant towards sweat or piss and most forms of lube making it a 24/7 toy – if you are shaved. Pubic hair getting caught between the TPR and your skin is an “interesting” sensation you want to avoid.

A comparison of the material thicknesses between the Oxballs Nuttsling on the left and the Megamen cockling on the right.

A comparison of the material thicknesses between the Oxballs Nuttsling on the left and the Megamen cockling on the right.

Putting it on works like the Oxballs: Pull the vertical tube apart and put your balls through there, adjust the tube than pull the main body over your hard dick.

For any more play than just “wearing a ball stretcher” it really depends what you are looking for and you anatomy if this is the right stretcher for you. In order to get the bouncy feeling in your balls you need to have massive balls or be into pumping or saline. I have an average dick and a bit meaty, low hanging ball sack and my junk felt a bit lost in this toy. In order to add stretch you can of cause always use one or two or three (you greedy boys ;)) TPR cockrings like the Zizi Top. Of cause this toy works well as a separator between the conductive silicone loops when you use them for CBT. However especially for smaller balls I wouldn’t recommend this toy as a stretcher for ball beating because during several scenes a ball retreated into the tube. One thing I like about this ball stretcher is the T-shape with the differently long tubes: When the longer tube faces your body your dick gets a bit a bit pushed down which is an interesting sensation when fucking someone.

Conslusion: Comfortable ball stretcher for tight or big balls with true long-term potential
Pro Cons Where to get Price
Comfortable Can only be really filled by large genitals Keepburning(Manufacturer) 22,50€
Flexible A bit tricky to put on
Resistant towards sweat, piss and most lubes Uncomfortable with pubic hair

 

Bon4 Metal Chastity Cage Regular

Vendor: Mister B

The Cage locked with a 51mm Ring attached

The Cage locked with a 51mm Ring attached

Chastity is one of the big things in (gay) BDSM. Handing over the control of one’s dick and orgasms to a top is one of the biggest sacrifices a sub can do without interfering too much with his day to day schedule. This is what makes chastity devices so intriguing.

Despite its popularity I haven’t done a chastity device review yet. I owned two: A CB6000 and a cheap steel one. The first was too small for my soft dick, the second had too sharp edges and without a proper and in-depth testing I am not writing reviews. So I was pleasantly surprised when Mister B sent me the new Bon4 Steel Chastity Cage size Regular to review. And I was more pleasantly surprised when I found out that it actually fits my soft dick.

Detail of the Locking Pin with Pad Lock

Detail of the Locking Pin with Pad Lock

Design

The construction of this chastity device is fairly standard besides its being made out of brushed stainless steel. There is a cage which is connected to a ring behind your balls which keeps it from falling off. The cage is approx. 8,5cm long with a diameter of 3,7cm for the shaft and approx. 5cm for the glans. Between the cage and the ring there are two pegs with 1,2cm length to keep both parts at a comfortable distance and adding up to a total usable length of 9,7cm. The chastity device comes with four rings with the following diameters: 39mm, 44mm, 47mm and 51mm. With this variety the device should fit most dicks. If you have a smaller one you can always take a look at the small version for 149€.

The device has a few unique properties due to the material. The rings have a hinge at the bottom which makes putting it on quite easily. I have also heard a lot of reports from friends who’s dicks broke plastic/ silicone chastity devices over time due to material fatigue. This is defiantly not going to happen with this device. The build quality of the toy I have gotten is superb but if there should be any rough or uncomfortable spaces the toy comes with a little sheet of fine sandpaper and tape to mend these spots. There is also a small lock in black bag the toy comes in.

Playing with it

Detail of the hinged ring

Detail of the hinged ring

It is kind of hard to write this section. The chastity cage isn’t really a toy, it is a control device made to be worn 24/7. With the high build quality and the material which will withstand moisture and physical stress the Bon4 Metal Chastity Cage is up to the challenge. But in the end more than even any piece of gear it has to fit perfectly to fulfill its purpose. A too loose ring and you can get out of it easily or it will simply fall off when walking. A too tight ring will make wearing it for a long time uncomfortable or can even cause damage to your genitals due to cut circulation. So even more than with other toys I urge you to try it out if it fits you. If you have problems with the ring sizes Bon4 offers addition ones with 36mm and 56mm diameter. The lock is quite a high quality one but still it is more a psychological barrier for the sub. A skilled lock pick will sooner and a desperate sub will later figure out how to open it with a pair of paperclips. For checkable security I recommend using numbered plastic locks.

One of the greatest problems with chastity cages is hygiene. Most devices only have small holes for pissing and some for water because materials like plastic doesn’t allow for bigger ones without compromising stability. Yet again stainless steel doesn’t have this problem so the case basically consists out of holes with some beams which makes hygiene not problem. You simply shower wearing the cages and you are all set. The material also opens the door for some torture possibilities. Since metal picks up temperature quite easily most subs fund mild ice and fire play… interesting. And I probably don’t need to tell you that steel is conductive. Of cause there is a downside: The metal makes the cage way heavier than the plastic ones. My testees had very different opinions on that topic: Some found it uncomfortable, some loved the constant pull and movement on the balls.

Everything you get when you order the Bon4 Metal Chastity Cage

Everything you get when you order the Bon4 Metal Chastity Cage

Afterthought

This review covers only the “technical” aspects of the Bon4 Metal chastity cage. Chastity never has quite been my kink, partly because I was frustrated with the cages not fitting my dick. I also didn’t find the thought of handing control of my dick over to a top tempting. For this review I have worn the device on and off for a couple of days and was genuinely impressed how much I liked it. Yet a true long term test has yet to be done. A top friend of mine has challenged me to a week of chastity which will begin this Sunday. You can expect a small blog entry every day about my experiences and problems with the cage. But a week doesn’t say much about true long term usability. I have been looking for a sub to be locked up for quite some time and as soon as I have found one and put into the device for an extended period of time there will be a follow-up review.

Conslusion: High quality and robust chastity cage
Pro Cons Where to get Price
High build quality Heavier than other chastity devices Mister B 159€
Regulation £ 119,99
Sturdy material Can be a bit more visual under the clothes than other devices
Good hygiene

 

HML Electro Ballstretcher

Vendor: HML

Construction

HML E-StretcherThe stretcher is made out of one piece of soft leather. The twist with this simple construction is that the leather is folded so despite the one-piece-construction the edge is nicely piping like rounded. In combination with the soft leather it makes this stretcher extremely comfortable to wear. For added stretch strength there is a seam running around the leather making the construction a bit stiffer.

The Stretcher has a diameter of 3,7cm.

The Stretcher has a diameter of 3,7cm.

The stretcher is 4cm wide and has only one diameter setting of 3,7cm which should fit most balls. Sewed onto the body is a 2cm wide separator which can be adjusted to two length with snap buttons: 8cm length and 2,4cm space between the rim of the stretcher and the separator strap and 9,5cm length with 3,3cm. That makes it a bit larger than the Mr S stretcher I reviewed in February. So if you have big ball, take a look at this stretcher. Like the Mr S stretcher there is a welded steel D-ring mounted onto the separator which is hold in place by two rivets. Sadly the rivets are quite close together so the D-ring won’t be in the middle when you adjust the separator to the larger size. I have already talked to the guys at HML they are making a new version of this stretcher with two diameter settings and more space for the D-ring. If you want this version right now, just write it into the comments when you order this toy.

Detail of the welded D-ring

Detail of the welded D-ring

The pièce de résistance of this toy are the two electrodes for 4mm banana plugs mounted on the separator strap. Because they are separate you don’t need another pole to use them.

Playing with it

I can’t say much more about this ball stretcher than I said about the Mr S stretcher in February: It is very comfortable to wear and has true long term potential. And because the D-ring is welded unlike the Mr S stretcher you can even engage in rougher play with this stretcher than the Mr S one.

Detail of one of the two poles for 4mm banana plugs

Detail of one of the two poles for 4mm banana plugs

As said above what set this stretcher apart are the two poles. They are 4mm sockets mounted between the two parts of a rivet so they have very little mass. Thus even with a low setting on your box you can induce quite a strong and sharp sensation. Turning the power up will soon lead to agony. Most subs than start to wiggle trying to get the stretcher off – which makes anything you attached onto the D-ring extra effective. Because the poles are placed at the middle of the separator strap you can even put silicone loops around the separated balls for really fried eggs.

Conslusion: Great ball stretcher with a lots of play possibilities
Pro Cons Where to get Price
Comfortable to wear for a long time Only come on one width & diameter HML (Manufacturer) 24,90€
Welded D-Ring
Two poles for e-stim
Good value for money

 

Steel Ball Stretcher

I intended to publish this review as the last piece to my ball stretcher series. But somehow I couldn’t find an angle from which to review this toy because a general review especially of the particular toy I am owning would be useless for anybody who doesn’t have balls which are at least vaguely like mine. So this is probably going to be more of a “Buyers Guide to Steel Ball Stretchers”. Let’s see where the muses will take me…

Closing Mechanism

Detail of the closing mechanism of a split ball stretcher

The steel ball stretcher is as the name says is made out of stainless steel so it doesn’t rust. The other main property of steel is that it doesn’t give in: It either fits or it is too large. The way the stretcher fits is determined by its length and the diameter of the central hole. Depending on the vendor you are looking at it comes in a great number of length, for the diameter I have so far only seen 34mm and 38mm diameter. The diameter can be a bit tricky: When you have a meaty sack but small balls you might have a problem wearing a steel ball stretcher because you need a larger hole to fit the meaty neck of your sack but your small balls might slip through the hole when wearing the stretcher. Because the outer diameter can’t be increased infinitely due to being able to close your legs when wearing it both length and diameter impact the third factor characterizing factor: The weight. This is yet again something you need to try out in order to figure out which is comfortable enough. But please keep in mind that extensively wearing a stretcher with a lot of weight will ultimately stretch your balls (which might be the reason to wear one for some people). I have seen two closing mechanisms for ball stretcher: It either is split in two halves that are hold together with hex screws (depending on the length 2, 4 or even 6) or you have a ¾ steel ring and a magnetic quarter is inserted. Personally I prefer the ones you have to screw together because I have caught way too often skin or hairs between the steel and the magnet.

Diameter & Thickness

38mm diameter of the central hole and 42mm height for 660g lead to a 12mm thickness

I sometimes wonder if this item is really a toy because for a standard dungeon scene I prefer other ball stretchers. They simple tighten the ball more effectively and make gripping them more easily. But I have to admit that the steel band on the bottom of a stretcher makes a good surface when hitting the balls. Then again weights can be metered and attached more easily to traditional ball stretcher with D-rings (I have to admit that there are steel ball stretchers with welded eyelets on them but because they are so bulky I found the stretcher very uncomfortable to wear). In my opinion steel ball stretchers are more a piece of fetish accessory especially for people into CBT. They can be worn comfortable under everyday cloth and the moving momentum of the steel always reminds you that there is something kinky staying with you throughout the day. Of cause that can be turned into a great mind fuck scene: The top attaches the stretcher to the sub’s balls, keeps the hex and they go out for a walk or shopping. Some of my friends actually use light steel ball stretchers instead of a chain collar when the work environment doesn’t permit such a bold sign of submission.

Disassambled

My split ball stretcher disassambled

At the end of every review I reach a verdict but this time I don’t really what to say: I love my ball steel stretcher but as said not as a toy but as a piece of gear. If you want something for torture in the playroom there are better and more flexible alternatives out there. But if you want something to carry your craving for CBT into the everyday life you should definitely give this toy a try.

Vendor Price
Mr S Split Ball Stretcher (1,25cm – 5cm) $59,95 – $99,95
Mr S Magnetic Ball Stretcher (4,12cm) $129,95
Mister B (1,5cm – 12cm) 59€ – 199€

Oxballs Trough

Vendor: Oxballs

Construction

_DSC7391The Oxballs Trough is a roughly cuneiformed piece of FLEX-TPR measuring 6,4cm at the widest part by 13,5cm. At the upper end is a 3,9cm by 2,2cm hole with a recess for your seminal duct through where you put your penis. Below that is the 3,7cm by 2cm hole for your balls which provide about 1,7cm of stretch. From that hole runs a reinforced, thick piece of FLEX-TPR to a 3,6cm by 2,2cm bulge on the end of the toy.

Playing with it

I have to admit when I have first gotten this item from Oxballs as a gift because there were some problems with an order I didn’t really know what to do with this toy. But after I figured out how to use it properly it because one of my favorite toys especially when traveling.

The initial application is making jerkin off more exciting: The hole for the dick restricts the blood flow a bit thus it works a bit as a cockring and the ball hole has a bit of a stretch and squeezes the neck of your sack so your balls bounce a bit when you start to wank (only for that you have to love this toy). But the piece de resistance of this toy is the bulge on the end. While jerking the bulge slaps against the part of your prostate located just below the perineum. With the toy come instructions how to use it properly and on that Oxballs says you should put lube on the bulge. I have tried it with several water and silicone lubes and it didn’t alter the sensation in any way; it only made clean-up more difficult.

_DSC7392So much about the vanilla application. I have used and had the Trough on me in a number of cum control sessions. For milking it is a great toy: The pressure of the cock hole helps sustain the erection and the bouncing balls and prostate stimulation supports the effort of squeezing another orgasm out off the sub. When it comes to edging the usefulness of this toy greatly depends on your style. When you mostly do head polishing or frenulum stimulation the Trough does nothing for you. If you jerk, you have to be careful because the bouncing balls and the bulge have an own momentum which is often enough to make the sub cum.

For other CBT purposes it as always depends on the sub’s balls. If his balls are tight the little stretch is enough to make them firm enough for good squeezing, twisting, hitting, etc. If you should put conductive silicone loops around the balls and the shaft depends on how brave you are and how well made your electro box is made. When jerking the two poles can meet thus hot-wiring your box. A friend has done that accidently with his ET232 and had no problems but with a less well-made box it can fry the internals.

For all different aspects of play the manifestation or intensity of the sensation depends greatly on the position of the sub: When sitting down you have to sit so far forward and when laying down the legs must be spread apart so much that the bulge can still move freely which can be uncomfortable (but maybe you want to go there). For an extensive scene I would recommend either standing legs spread a bit apart or sitting on a rim or gynecological examination chair.

Conslusion: The best masturbation device I have come across yet.
Pro Cons Where to get Price
Easy to use Versatility depends on ball physiology Oxballs  (Manufacturer) Currently free for orders over $20
Unique sensation Difficult to use when sitting or laying Regulation £34,99
Mister B 49€
Resistant towards sweat, piss and most lubes

 

 

 

 

Oxballs Splitsling

_DSC7386

The Oxballs Splitsling

Vendor: Oxballs

Construction

After having taken a look at just a stretcher from Oxballs today we add a divider with the Splitsling which is also made out of their exclusive extremely stretchy FLEX-TPR.

Like the Nuttsling it has three holes. Through the first you have to put both your dick and balls. It is slightly smaller with approx. 3,9cm by 2,7cm. The profile is also oblique so the stretcher fits nice and tightly onto your body. On the bottom of the hole there is a small recess for your seminal duct so even if you have a really big dick thus pressing the material tightly onto your genitals piss and cum can flow freely. Across from the first hole there is another one through which you put your dick. It is 3,6cm by 2,2cm and also has a small recess. Perpendicular to these holes is the stretcher which has less stretch than the Nuttsling with approx. 2,4cm of stretch. The tube is 3cm wide and on the bottom there is a 1cm wide piece of FLEX-TPR which functions as a divider. Because it is so flexible it works even with large balls.

Sadly Oxballs doesn’t (yet?) offer the Splitsling in the stretcher size of the Nuttsling or as the updated design of the Cocksling-2. If you need more stretch and a divider take a look at their Splitz.

The Seminal Ducts on the Back and Bottom of the Dick Hole

The Seminal Ducts on the Back and Bottom of the Dick Hole

Playing with it

I usually praise Oxballs toys for long-term wearability if you choose a toy which doesn’t stretch too much for your sack. In this case if you have a larger sack and especially large balls, try this toy out extensively if you can before you buy it. The FLEX-TPR is stretchy enough to accommodate even large sacks but it is made to get back into shape so the push of it towards your body can be more intense than you would expect from such a soft material.

But if it fits the stretcher is like any other toy from Oxballs: Comfortable to wear (again: if shaved properly!) yet it pushed your sack down and balls apart enough to make them ideal targets for torturing them. Because unlike with leather divider straps this divider is also about 1cm thick. Through the volume you can tie conductive silicone loops around the individual balls without them making contact which can lead to a… unique sensation for the sub. Also I found the FLEX-TPR a bit more practical when it comes to playing with wax and water compared to leather. One thing the FLEX-TPR can’t do is being used for adding weights or bondage! In theory you could put a shackle onto the divider as a D-ding substitute but the FLEX-TPR will when pulled on either stretch or tear. If you want to add bondage or weights please use suitable rope (like fat shoe laces) for another layer of bondage.

Putting the Splitsling on is basically the same way like the Nuttsling. But instead of pushing the back end on the perineum I found it easier to press the divider between your balls and then pull the rest over the sack. Otherwise getting the balls sorted out is kind of complicated.

Conslusion: Comfortable stretcher with divider for long-term wear if your balls are not too big.
Pro Cons Where to get Price
Comfortable A bit tricky to put on Oxballs  (Manufacturer) $28
Flexible Uncomfortable when unshaved
Mister B 32,70€
Resistant towards sweat, piss and most lubes Divider can’t be adjusted Uberkinky £24,99
Bulky divider

 

 

Oxballs Nuttsling

Vendor: Oxballs

Construction

The Stretcher with the Penis openen

The Stretcher with the Penis openen

The last couple of weeks I have been reviewing leather ball stretchers. Today’s toy is made out of Oxballs’ exclusive super-stretchy FLEW-TPR.

The Nuttsling has three holes. Through the first you have to put both your dick and balls. It is approx. 4,1cm by 2,9cm and oblique so the stretcher fits nice and tightly onto your body. On the bottom of the hole there is a small recess for your seminal duct so even if you have a really big dick thus pressing the material tightly onto your genitals piss and cum can flow freely. Across the first hole is the second one through which you put your dick. It is 3,3cm by 2,2cm and also has a small recess. Perpendicular to these holes is the stretcher which provides approx. 3,2cm of stretch. Halfway through the 2,5cm wide tube there is a bulge for a snug fit of your balls. Around all holes is a piping like bulge which makes wearing the Nuttsling more comfortable.

The back of the Stretcher with the Recess for the Seminal Duct

The back of the Stretcher with the Recess for the Seminal Duct

If you balls are really tight, Oxballs offers a model with a bit less stretch called the Cocksling. There is a new version out the Cocksling-2 which has “supporting beams” all around the stretcher tube for a bit extra stretch. I can’t wait to get my hands on a hopefully soon to be made Nuttsling-2.

Playing with it

This stretcher is made for really long-term wearing due to the material properties. The TPR is very flexible. Due to the bulge in the middle the stretch is good but still the stretcher will still adjust (to a certain level) to how much your balls can take. This also matters when you start moving you balls (jerking off, hitting, etc.): Unlike leather or stiff rubber stretchers the TPR will give in making it a bit more comfortable to wear (and in my testees’ opinion the balls bounce more while jerking off). Also unlike leather this stretcher doesn’t care about sweat and piss. But the comfort is only try when you have shaved (not trimmed!) your pubes. When pubic hair gets caught between the skin and the TPR and you start to move it feels like pulling on your pubes (which might be what you want).

So, how do you put this stretcher on? The method which works best for most of my testees and me is

  1. putting both forefinger and middle finger inside the stretcher tube,
  2. squeeze and pull it apart,
  3. push the back against the point where your perineum meets your scrotum,
  4.  pull the tube over your balls,
  5. than your dick through the hole and
  6. finally adjust the tube which will probably still be a bit deformed after the squeezing.

Even though this might sound complicated once you have figured it out this stretcher is actually the easiest I own to put on because you don’t have to deal with gripping your balls with one hand, put the leather around it with the other, than take care that no skin is in between the snap buttons while making sure that both balls stay below, etc.

The Bulge inside the Stretcher Tube for a snug and firm fit

The Bulge inside the Stretcher Tube for a snug and firm fit

I have already talked at length what you can do with balls inside a stretcher. But due to the flexible material squeezing the balls of your sub is easier than when he wears a stretcher made out of a stiffer material.

Because TPR toys can be used with most forms of lube (water, oil, silicone based and water/silicone hybrids) I use the Nuttsling for electro play. For electro CBT I mostly rely on simply silicone loops. In order not to short-circuit them they mustn’t touch so I put one loop just below the bulge at the ending of the stretcher, one just behind the bulge of the dick-and-balls hole and the fun can begin. And if I need water-based lube for better conductivity the TPR won’t mind.

Conslusion: The most comfortable ball stretcher I own with true long-term potential
Pro Cons Where to get Price
Comfortable A bit tricky to put on Oxballs  (Manufacturer) $27
Flexible Uncomfortable when unshaved
Regulation £33,99
Resistant towards sweat, piss and most lubes

 

Recon Leather Ball Stretcher

Vendor: Recon

Construction

The Ballstretcher with Divider in the smallest Adjustment

The Ballstretcher with Divider in the smallest Adjustment

After having covered Mr S’ ball stretcher range the last two weeks today I am going to take a look at the most basic ball stretcher from Recon which I have got in the 5cm width. The stretcher itself is made out of two layers of leather: The outer is a stiff, almost cardboard like leather, the inner is a soft one. Due to this construction all metal parts are making skin contact again bringing potential allergic problems. Three snap buttons hold the stretcher in place, sadly there is only one diameter adjustment for 3,7cm.

The 1,9cm wide divider has the same basic construction: the stiffer leather on the outside, the softer leather on the inside. It is hold in place by three black rivets on the wider part and through the three snap buttons you can have three different length settings: 9cm length with 4,1cm space between the rim of the stretcher and the divider, 10cm and 4,8cm and finally 11cm and 5,7cm. There is a not welded d-ring which freely runs along the divider. On the one hand this is handy because you can put it for bondage purposes on the front or back of the balls but on the other hand it can fall off the divider (which to be honest is unlikely because it would have to get over the three female parts of the snap buttons).

Playing with it

In order to play with this toy you need a fairly large scrotum. Because the leather is really stiff this stretcher isn’t really forgiving lengthwise. If it fits really well (or even a bit loose) it is comfortable to wear for some time, but if it fits tightly or as soon as you add 250g of weight the hard edge will start to hurt and irritate the skin. Due to the divider allowing for quite large settings this toy is made for people with REALLY large balls or people into pumping/ saline play.

The only Diameter is 3,7cm

The only Diameter is 3,7cm

Playwise the same things can be done than with the Mr S one (which I will mostly just copy and paste for your convenience):  Because the d-ring is in the middle the pull of weights is directly downward and is felt more on the individual balls than on the sack itself. When you start moving the weight, p.e. when wanking, is will start to swing freely and will gather moving momentum which will increase the pull on the balls. Of cause you can use the d-ring as an anchor point for carabineers again. I particularly had fun attaching it tightly to the end of my shoulder-to-wrist-restraints.

The divider offers some interesting possibilities for CBT. It makes targeting single balls more easily like for attaching single electrodes (fried eggs anyone?), individual pressure or hitting (my favorite for this is a riding whip). Another cool thing which I enjoyed very much is sensation play: Cool one ball with ice and drop wax on the other.

Conslusion: A basic, inexpensive ball stretcher for large balls with inferior leather
Pro Cons Where to get Price
Incredible inexpensive Inferior Leather Recon  (Manufacturer) 5cm: £47,5cm: £510,5cm: £6
Doesn’t collapse easily Hard edges
Divider suitalbe for REALLY big balls Only one diameter adjustments

Mr S Ball Stretcher with Divider

Vendor: Mr S

Construction

Oil Taned LeatherUnlike last week’s stretcher this one is made out of a single 3,8cm wide piece of leather which Mr S calls oil tanned. Despite being nearly 2mm thick is it very soft and has smooth edges making it comfortable to wear. The comfort has the downside that this stretcher isn’t as stiff as others thus the stretch will not as strong as other stretcher with the same width. Also due to only using a single piece of leather the metal is able to make contact with the skin which can be a problem with people being allergic to certain metals. The stretcher is closed with a pair of snap buttons with the Mr S logo on them. You can choose between a diameter of 3,4cm and 2,7cm.

Logo Snap ButtonsThe divider strap is made out of trifolded garment leather and 1,9cm wide. Two rivets attach it to the wider part and there are two snap buttons which allow a divider length of 6cm with 2,5cm space between the rim of the stretcher and the divider strap and 5cm length with 1,2cm. On top of the divider is a not welded d-ring which is hold in place of a strap of trifolded garment leather two rivets. The space between the rivets is large enough so that the d-ring can move into the middle of the divider on both length settings.

On Mr S’ website this toy is still shown with three snap buttons above each other and thus a larger divider strap. When I was at their store in May 2013 they told me that they only make this two in the width I am owning it. This isn’t necessarily a bad thing because the stretch is comfortable for all people who tried this stretcher on. However the divider strap was too short for all but one. Apparently Europeans have larger/ meatier balls. Please keep in mind that the stretcher and divider will be shorter than shown on your website when considering this toy.

The two Divider adjustments

The two Divider adjustments

Playing with it

This section is a bit hard to write because most of my testees couldn’t try out the full potential of this stretcher. As a simple leather ball stretcher it is the best I have got for long-term wear (even more comfortable than the Mr S one with a D-ring I reviewed last week) because the soft leather will more easily adjust to tighter balls. But as written above the divider sadly was too small for nearly all my testees and me. So I have to rely on a single report here.

Left: 3,4cm diameter Right: 3,7cm diameter

Left: 3,4cm diameter
Right: 3,7cm diameter

Of cause you can do everything with this d-ring as with the one last week. The weight sensation will be a bit different. Since the d-ring is in the middle the pull is directly downward and is felt more on the individual balls than on the sack itself. When you start moving the weight, p.e. when wanking, is will start to swing freely and will gather moving momentum which will increase the pull on the balls. Of cause you can use the d-ring as a anchor point for carabineers again. I particularly had fun attaching it tightly to the end of my shoulder-to-wrist-restraints.

Detail of the Divider with the D-Ring on top

Detail of the Divider with the D-Ring on top

The divider offers some interesting possibilities for CBT. It makes targeting single balls more easily like for attaching single electrodes (fried eggs anyone?), individual pressure or hitting (my favorite for this is a riding whip). Another cool which I enjoyed very much is sensation play: Cool one ball with ice and drop wax on the other.

Conslusion: A great ball stretcher with a lot of play potential – if the divider is large enough
Pro Cons Where to get Price
Comfortable to wear for a long time Only come on one width Mr S (Manufacturer) $39.95
Great workmanship Metal is making contact with the skin
D-Ring D-ring is not welded
Good value for money Divider strap is too short

 

 

  • 9ee6292c41ad2ef691c9e90a8a7a2b8a

    9ee6292c41ad2ef691c9e90a8a7a2b8a