Fetters Leather Chest Binder Restraints

Vendor: Regulation

Construction

Detail of the Torso Belt’s Closing Mechanism Using a Lock

The main body of this restraint is a 10cm wide belt made out of 3mm thick bridle leather. On one end there is a locking pin (which naturally comes with a lock) and on the other 15 rivet reinforced holes are punched to adjust the circumference between 94cm and 123cm so you can fetter almost any body type – from twink over body builder to stocky bear – with this restraint. For a more comfortable fit even during extended scenes, the bridle leather is lined with soft garment leather.

Onto this body, two sets of restraints are riveted: An upper arm on the side and a wrist restraint in the front. The follow the same design scheme with bridle leather body and garment leather lining. Their closing mechanism is the same as the one on the Fetters Locking Restraints: A 3cm wide belt, closed with a roller buckle and shut with a locking pin. They are attached using only one rivet so they can twist and turn to accommodate different anatomies. Into the buckle of the upper arm restraints there is D-ring integrated. Another attachment point is a D-ring in the front between the wrist restraints which is hold in place by a piece of leather and four rivets.

The Fetters Chester Binder Restraints

Detail of the Garment Leather Lining and the Edge of the Body’s Bridle Leather

As high quality the materials and craftsmanship of the Chester Binder Restraints are – like every toy and piece of gear made in the workshops of Fetters – a little drop of bitterness are the edges of the restraints. The lining is slightly larger than the rigid leather on the outside so when pressed against the body it covers to some extend the hard edge of it. But still, I would have wished for the outer leather to be dyed and burnished or to put a piping around all the edges for the edges to be line with the overall quality feel and craftsmanship of the toy.

Detail of the Central D-Ring

Playing with the Chest Binder Restraints

When I first got these restraints, my testees and I saw them more as a “mobile” restraint: While rendering the torso and its limbs almost completely useless, the sub can still move around. So the restraints are great for pride, street fairs or party setting where he should still be able to walk while enjoying an intense bondage experience. In clubs the D-rings come in handy because with them the sub can be easily fixed to a post or tied in a frame when he needs some timeout. It lies in the nature of the design of this toy that the nipples are not accessible. However they are good for flogging (novice tops) because the leather belt is a good divider between the area that can be hit and the one which should not. The floggee should have some experience already though because maintaining posture by just leaning against the cross and not hands to stabilize oneself is a challenge of its own – and can introduce a hot element of discipline and punishment if failing to.

The Chest Binder Restraints quickly won the favor of one of my testee panel tops who likes the aesthetic of classic fetish attire like leather uniforms or rubber cat suits and thus dislikes the coverage of straitjackets. Unlike straitjackets, the hands are free in these restraints which opens up a whole world of interesting tasks: Holding the ash tray for the top or a tablet in a cocktail party is almost stress bondage. Another possibility is to make the housework more difficult through the extremely limited range of hand and arm movement. If heavier bondage is desired, simply close the wrist restraints slightly below the wrist and add either Padded Fist Mitts or Bondage Mitts which can be connected to a (muzzle’s) collar.

Detail of the Upper Arm Restraint’s Closing Mechanism inlcuding a Roller Buckle, Locking Pin and a D-Ring

During one scene with a pain pig, I discovered the “stationary” potential of the Chest Binder Restraints. It is great tool to effectively fetter the torso and the upper arms in a lay-down bondage setup. Before the Chest Binder Restraints, I had to put the subs into a bondage harness which while effective, took quite some time to adjust and still left the upper arms unbound. With the D-rings on the side (and maybe running a tension strap through the front D-ring), the torso is effectively kept from getting up. A downside is the locking pin pressing into the back of the sub. Adding a small cushion can soften it, so he can stay bound for extended periods of time.

Conclusion: Extravagant, multipurpose restraints with almost perfect build quality.
Pro Cons Where to get Price
Almost complete immobilization of the arms while allowing to move around Edges of the restraints are not as well executed as the could be Regulation £148.99
Sub still (somehow) able to serve while bound
Enough D-rings for more complex bondage layouts
Leaves gear visible, most of the body accessible and does not a lot of coverage in hot environments
Tagged , , , , . Bookmark the permalink.

Schreibe einen Kommentar

  • 9ee6292c41ad2ef691c9e90a8a7a2b8a

    9ee6292c41ad2ef691c9e90a8a7a2b8a