Fetters Portable Bondage Board

The Fetters Portable Bondage Board

Vendor: Regulation

Construction

The product name of this piece of bondage equipment is pretty descriptive: It is a bondage board that can be folded in the middle.

First, let’s look at its bottom. Two wide and sturdy hinges keep both sides aligned with each other even during heavy play and fold together smoothly. In order not to damage the precious hardwood floor in Fidelio-passworded play mansions four thick rubber bumpers are stapled onto the cloth-lined bottom (if you are too young for this reference, watch “Eyes Wide Shut”). On each side of the top there is a powerful neodymium magnet keeping both sides securely together when folded. In order to carry the board around comfortably, a piece of nylon strap is mounted on the middle of each side. On one side a nice stainless steel Fetters badge is screwed between the two ends of the carrying loop. Folded together the board is 53.5cm tall, 60cm wide and about 10cm deep. Unfolded you naturally get a bondage surface of 60x107cm.

The D-rings Folded Up

The body of the board is made out of sturdy wood boards padded with thick firm yet comfortable foam. The play surface on the top is either lined with leather or a material called Rubluxe which is a rubberized fabric that is both oil- and waterproof. For fettering D-rings with an inner width of 39mm, inner height of 32mm and almost absurd wire strength of 6mm are used. They are mounted to the board putting each below a wide and thick piece of bridle leather which is hold in place with four screws. There are six D-rings on each side and one at each end. So in total there are a whopping 14 bondage points around the board.

Due to all this heavy duty materials and workmanship the board weighs 10kg.

The Footprint of the Folded Bondage Board

Playing with the Portable Bondage Board

Most subs I have introduced to this piece of bondage equipment where initially skeptical. Could such relatively compact piece of gear work as a secure basis for bondage? The torsional stiffness of the hinges, the thick and sturdy boards and massive D-rings which are massively mounted onto the board in combination with a tight fettering allow for little wiggle room. So despite being portable and relatively light, it is a good, secure piece of bondage furniture! These are good news especially for those who travel a lot or have to store away their play gear below a bed or in a wardrobe once the session is over. One of my testees bought his one especially for play parties and cons. He likes to play public but wants a piece of furniture of his own when the provided play furniture is occupied or when there is only little space, for example on the side lines of a mosh.

Most people will probably only use the Portable Bondage Board folded open. But even folded together and using only one side, it is a nifty piece of play furniture. Due to the smaller footprint, it easily fits in the corner of a room and thus works perfectly as a slave parking spot. Despite resting on padding, there is little rocking or movement so a sub can safely stand on it, his ankles and maybe even balls being tied to the D-rings. But the area of just half a board is even large enough for a sub to kneel down onto. This way you can of course tie the ankles, thighs and wrists to the boards for an even more intense bondage scenario.

The Fetters Badge and Left the Small yet Powerful Neodymium Magnet

Of course the board shines the most when lying down. It is long enough to cover the torso and the thighs of most subs (up to about 1.90m body height) so it covers most joints and limbs. There are countless different positions you can tie your sub to it: From lying and sitting over kneeling to standing, from comfortable long term bondage over painful stress positions. There are some easy to recreate examples on Regulation’s product page. But the Portable Bondage Board encourages you to be creative and push the limits of your sub’s flexibility. I even managed to tie two subs on the same board, kneeling either back to back or facing each other. If you then introduce a flexible double ended dildo or a pair of nipple clamps, you can create very interesting and intense play on a little space.

A Jimsupport Rim placed on the Bondage Board

For the actual bondage process, you can use different means. If you don’t want to add additional restraints, you can use rope or my beloved Velcro quick restraints. The D-rings are large enough to house several ropes at the same time. Their weldseam is below the leather flap so the ropes run smoothly through the D-rings. When using cuff style leather, rubber or neoprene restraints, the D-rings are wide enough to thread a restraint’s belt directly through the D-ring. While this limits the restraint’s and thus the sub’s movement the most, in case of an emergency you would have to cut the belt itself, destroying the restraint. Of course, human health and security always goes over gear preservation. So my recommended way of attaching restraints to the bondage board is using tension straps. Inexpensive to replace if cut yet almost as effective as directly connection restraint and board.

A question I get asked in almost every reader question is “Which lining material should I choose?” For my board, I chose leather and being made by Fetters it did not disappoint: It is soft yet feels strong, the grain is subtle but noticeable and the smell is intoxicatingly good. If you “just” want to fetter someone to the board, it is a good choice! But leather is a little bit higher maintenance, does not like wetness or messy stuff. So if your bottoms leak a lot of pre-cum or you want to get piggy go for Rubluxe. And to all those fellow pigs out there: The space between the D-rings is about the clearing between the legs of a Jim Support Adjustable Rim Chair, depending on the seat height. Simply fix the legs with tensions straps to the D-rings, maybe fix your bottom to the D-rings and pig out.

Speaking of Rubluxe: The bondage board is also a great fisting base when traveling. The lining is thick enough for a bottom to go both comfortably in doggy or lying on his back. The board itself is a stable base even on soft hotel mattresses. When lying on his back, the combination of ankle restraints and tension straps anchored on the D-rings next to his head can create a travel sling-like layout without putting draft on the bottom’s neck. But for this play, the Rubluxe surface is clearly the superior one for his kind of play. Of course you can put a pad below the fistees ass when using the leather version. But as always, lube finds its way around and as soon as the bottom starts to piss you are in for an intense cleaning session.

The Hinge

Speaking off piss, the rubber bumpers on the bottom give your 7mm ground clearance.  So a Rubluxe covered bondage board can also be used to detain a urinal bottom as long as there is no standing piss which could soak the board from the bottom.

Since the board must not fold when putting pressure on the seam in the middle, it folds inwards not outwards. This means that the padded surface is always on the outside, exposed to potential damages. To protect these sides, I highly recommend ordering the canvas carrying bag for £35 along with the board, especially when you are going to travel with your board!

Conclusion: Effective and versatile yet portable piece of bondage furniture.
Pros Cons Where to get Price
Many D-rings for creative bondage and intense bondage Storage bag is a must purchase when traveling with it Regulation £245
Really sturdy yet somewhat portable
Two options for lining depending on usage scenario and fetish
Tagged , , , .Speichere in deinen Favoriten diesen permalink.

Schreibe einen Kommentar