Suchergebnis für: E-Stim Systems premium

E-Stim Systems 1 ¼ Inch Flanged Bipolar Electrode

Mock Up Electrode compared to exising Products

This is a first time in the desiderate section: I am not only wanting a specific toy, I am (hopefully) helping designing one. As you can read here I am a big fan of the E-Sim System’s premium bipolar electrode. They are comfortable to wear and will probably outlive me.

Outline of 1,25 Inch ElectrodeBecause E-Stim Systems is based in the United Kingdom they use the imperial measurement system thus their products come in sizes 1”, 1,5” and 2” (and of cause much, much bigger). At least in my opinion this leads to very big gaps between the different sizes: While a n electrode with a  1” diameter is easily inserted (and most likely will as easily fall out again), one with a 1,5” diameter is for people with an untrained anus already a struggle, especially when it comes to Flanged series which has dull heads.

I have always liked the concept of their flanged, easy to sit on electrodes, especially in combination with a remote controlled box. But all electrodes in the range were either too small (the difference between the head and the neck with the Flange is so little it will most likely fall out of your ass when you walk) or too big. So I am hoping that in some point of time they will start manufacturing a 1 ¼” electrode: Not too big to cause any bigger problems when inserting but with a large enough difference between the head and the neck to walk around freely without having to fear approx. 220g of Steel falling out of your ass. In the end it is in your hands to get it into production: I have talked to the guys at E-Stim Systems. If enough people demand a product they will put it into production.

E-Bead 2.0

Small & Large E-Stim Systems E-Bead 2.0

Vendor: E-Stim Systems

A couple of weeks ago I reviewed the new E-Stim Systems version of Mr SElectrified World’s Most Comfortable Butt Plug that. Since the WMCBP has always been a signature product of Mr S, another product E-Stim Systems now manufactures for them got little attention: The E-Bead 2.0. In my opinion too little attention, to let’s take a look at this toy.

Design

The E-Bead 2.0 is a bi-polar, insertable electrode. This means you do not need another electrode for stimulation. The two poles equally sized and barrel-shaped which taper about a third each way towards their flat tops and bottoms. Between them is a thin isolator made out of black polymer. Unlike other E-Stim Systems electrode, both poles are permanently connected. Due to this design, there are now two 4mm banana jacks on the bottom of the electrode but a 155cm long sturdy lead with a 3.5mm jack is soldered onto is.

What the E-Bead 2.0 does have in common with E-Stim Systems other premium electrode is aircraft grade aluminum they are made out of. The surface features a brushing that gives the material a silk-like look and feel.

The E-Beads 2.0 comes in two sizes for different experience levels.

Size Overall Length Barrel Diameter Barrel Length Isolator Length Weight
Small 96mm 32mm 38mm 20mm 130g
Large 124mm 38mm 51mm 22mm 255g

Playing with the E-Bead 2.0

If you have played before with other premium insertables from E-Stim Systems, you will soon realize that the E-Bead 2.0 is unlike (almost) every other electrode they make. This is largely due to both sides being equally large and equally heavy or to be frank, a bit tail-heavy due to the lead. Since both barrels have the same, large mass and relatively large surface area, the sensation of the E-Bead 2.0 is mostly smooth – depending on your power box, program and output level. This is not really a short-coming but if you wrap your head around it, it becomes a cool new way of playing.

Detail of the Flat Barrel Tops and the Soldered Lead

The most common game my tested played was challenging (looser) subs standing straight or suspended in a harness to keep the electrode in. While this does not sound too hard at first glance, the E-Bead focuses most of the stimulation directly on the sphincter causing the sub to tense it. When the stimulation decreases, he relaxes and the electrode could fall out. A loosely related game did a dom play with his sub: Put him in a jockstrap, loose shorts, attach the electrode to a remote controlled box and the sub has to walk around and not facing the embarrassment of a buttplug electrode falling out of his ass. He tried this type of play with other electrodes but since the base usually has considerably less weight than the head, it only worked well with either extremely large electrodes or the E-Bead 2.0.

As an electrode for lying down, the E-Bead 2.0 got mixed reviews from bottoms. Some liked the slimmer footprint since there is not base, others found the lower barrel too long and thus uncomfortable. And of course, depending on the bottom’s experience level, there is a chance of the electrode just slipping in.

Detail of the Isolator between the Two Poles

The highlight of the E-Bead 2.0 is of course the fact that through the soldered lead it is a closed system. This means the electrode can be completely pushed into the rectum. This is opens up a completely new field of e-stim play. Through the large mass and length, the electrode “spins” inside the hole, touching areas otherwise never stimulated. The effect intensifies when the bottom wiggles and moves and thus somehow comes close to feedback loops created by audio or movement programs on power boxes: The more the bottom moves, the more movement inside the rectum, the more stimulation. Especially with the large electrode, electrode’s mass moving around inside the body adds another layer of stimulation. This kind of sensation is the strongest when the sub moves freely, when walking for example. Another unique experience for loose subs is when a skilled top slip two fingers in and press the prostate between the two poles for a mind-blowing stimulation.

Of course, this construction makes handling the E-Bead 2.0 a bit different from other electrodes. You must not pull on the lead to get it out! The lead is sturdy but not made to handle this kind of force. Instead, the bottom should push it out. Due to the shape, the electrode sometimes “jams” inside the rectum but rest assured: Everything that goes in, comes out again. Though being fistable for the top to grab it manually is nifty and adds another aspect to the play 😉 Since the electrode can’t be disassembled, simply wash the body and the lead in warm soap water, leaving the plug outside the water.

Conclusion: High quality and nimble electrodes for unique stimulations inside the rectum
Pro Cons Where to get Price
Unique sensations inside the rectum Hard to keep in when only one pole is inside the rectum E-Stim Systems Small: £95.95
Large: £104.95
Long Lead
Excellent Build Quality A bit more difficult to clean than other E-Stim Systems premium electrode

E-WMCBP 2.0

The E-Stim Systems E-WMCBP 2.0

Vendor: E-Stim Systems

A little bit over 4 ½ years ago I reviewed the original version of Mr S’ Electrified World’s Most Comfortable Butt Plug. Mr S discontinued the original model some time again – both the electrified one (probably because there have been problems with lead fractures) and “analog” one. In March 2019 a new all-silicone version was introduced, leaving e-stim lovers twitching bit unsatisfied. Luckily half a year later Mr S Leather proudly presented E-Stim Systems as the manufacturer of an all new Electrified World’s Most Comfortable Butt Plug or short E-WMCBP 2.0. Being a big fan of E-Stim Systems’ premium electrodes and having to live up to a massive legacy, I was very excited for this review! Let’s see how the E-WMCBP 2.0 performs.

Design

As the name already states the E-WMCBP 2.0 is an insertable electrode and like almost all premium E-Stim Systems ones a bi-polar one, meaning you don’t need another electrode to enjoy the sensation. Like its brothers it is made out of aircraft grade aluminum which is treated with E-Stim Systems’ “new” matt finished, giving it a slik-like look and feel.

Detail of the Screw and Banana Jack for the Body

The basic form follows the one of the original World’s Most Comfortable Butt Plug: The body starts out cone-shaped with a dull tip followed by a barrel-shaped middle section which about 60% of the overall body length until it tapers again into a cone-shaped bottom. The transition from sloped cone to straight barrel is softly rounded and thus a bit more comfortable than on the original toy.

Like all E-Stim Systems premium electrodes now follows a neck made out of a black polymer which 28mm long and has a diameter of 11mm. This houses and isolates (together with a small white polymer washer) the stainless steel screw from the base. At the bottom of the screw there is not only a 4mm banana jacket but also a 2mm deep hex key socket.

The base is a disc with 50mm diameter and 11mm height. The middle is slightly tapering towards the neck and softly flows into the disc’s surface. On base’s side there is another hole for a 4mm banana plug, turning the disc into the second pole.

The E-WMCBP 2.0 comes in two sizes. Both sizes share the base but the body is significantly different.

Size Overall Length Body Diameter Body Length Weight
Medium 126mm 38mm 75mm 270g
Large 139mm 44mm 88mm 355g

The E-WMCBP 2.0 Disassembled

Playing with the E-WMCBP 2.0

Being an e-stim plug, let’s see how the E-WMCBP 2.0 performs in that regard. Being offering a large mass and surface, this electrifiable butt plug provides very smooth and pleasurable sensations to start out with. Though depending on the box, program and power level naturally can turn into a stingy beasty. The relatively large and thick base compared to other E-Stim Systems’ insterables makes the sensation even a tad bit softer than other plugs. Due to the top-down-pole-distribution this plug is perfect for the often sought getting-fucked sensation wave-shaped programs provide.

All the points more or less also applied to the original design. The greatest different is the mechanical and thus handling aspect of the new plug. The most important difference is the stiff neck that connects the base with the body. Being rigid there is a leverage effect, especially when being outside and walking. In combination with the heavy and voluminous body this lead to interesting sensation inside the rectum, particularly when the head hits the prostate.

Detail of the Base with the Banana Jack and Tapering Center

My testee panel was split on judging this effect. Some enjoyed the added stimulation, other said that WMCBP lost a bit of its charm and USP of being comfortable, even almost unnoticeable wearable over hours without the flexible connection. I have never been a fan of long-term plug wearing so I cannot tip the scales. So when you have to replace a possible broken original Electrified Worlds Most Comfortable Butt Plug keep in mind that the wearing sensation can be very different. Since the neck is longer and thinner than on all other E-Stim Systems’ electrodes, the sphincter closes up more, so through the leverage this event is intensified when the anus twitched from the stimulation. As an added bonus the thinner and longer neck lowered the risk of the plug falling out when being out and about. This effect is supported by the different base design. The original base had a flat surface that was connected by a 45° edge to the sides. So a relatively large, flat surface was pressing against the anus, having some leverage effect. It is surprising, but the little tapering middle section makes for an enormously more comfortable, almost ergonomic wearing experience, compensating a bit the negative effect of the solid neck.

Detail of the Tapered Body with Blunt Tip

The stiff neck has another advantage. The original plug was a nightmare to push through the sphincter once lubed the toy. The body became slippery and gripping the base did not provide any help at all. With the rigid connection, even after lubing up the base serves as a comfortable handle. Speaking of insertion: Being made completely out of metal and polymer, in theory you can now use silicone lube with the E-WMCBP 2.0 – but only if you use it without e-stim stimulation. Silicone lube is an isolator. If you want sizzling e-stim fun, only use water-based lube (Specific e-stim lube is not necessary in most cases. Personally I use Swiss Navy Waterbased for e-stim).

Following the E-Stim Systems’ standard design for premium insertables, the E-WMCBP 2.0 addresses two of my major points of criticism on the original toy: Where on the legacy version lead fractures was a constant threat, the E-WMCBP 2.0 is virtually indestructible. Also cleaning is a jiffy: Unscrew the body from the base, take all elements apart and wash in hot dish-soap water, dry, sanitize, done.

Conclusion: An evolution in quality and performance of an iconic toy while losing a bit of the original’s uniqueness
Pro Cons Where to get Price
Very smooth sensation Through stiff neck probably not the “World’s MOST Comfortable” butt plug anymore E-Stim Systems Medium: £104.95
Large: £114.95
Unique Base-Body-Pole ratio
Excellent Build Quality & virtually Indestructible
Easy to clean

Christmas Gift Tip 2: Bigger is Better

One man’s pain is another man’s pleasure. Or in this case: One man’s playroom decoration is another man’s favorite toy.

Being in marketing I know that one that especially clothes for women are sold with the argument “just buy something that doesn’t fit and make it your goal to lose enough weight to get into it.” So today’s tips are for a number of different groups: For the people looking already for a new year resolution to train their ass or balls so much that by the end of next year they can take one of the toys. For the experienced size connoisseur who looks for something new to play with. And for the people who want to add a striking piece to their playroom which sparks a conversation and maybe an interesting session.

I have been asked quite often if I knew an ass lock that is truly stuffing and comfortable to wear. The only one on the market I know off is the Keepburning Hoolalass. They have a number of attachments but the Hydro with a diameter of 70mm should be enough to even bring a greed hole pleasure when walking around wearing it.

Hydro

Hydro 39,90€

Hoolalass

Hoolalass Black 12,90€

I might be doing a review of the Hoolalass system in the next year if I can get my hands on one. So if you are interested to be kept updated follow me on Twitter and check my website on a regular basis.

Also from the guys of Keepburning comes the Finland Boll. With a diameter of nearly 11cm at the glans it is one of the largest dildos with a natural look. Sold either in classic black, flesh color or blue it is a great gift for any fistee working at home to finally get the second fist up his ass.

Finland Boll

Finland Boll 199€

Nearly as big but a whopping half kilogram heavier is the Estim Decimator plug. As you know I really love the design of their premium electrodes. And this is just the right one if you want to enjoy the feeling of getting fucked by electricity even after a heavy fisting scene – or if you like me are just looking for a stylish, kinky paper weight/ desk ornament.

Decimator

E-Stim Decimater £325

Another thing I like are stretched and bouncy balls. I love my ball stretcher because it fits my somewhat middle of the road balls just right. But if you are a fan of low hangers this ball stretcher from Mister B is the one to get. It stretchers your balls 12cm and with it weight of over 2kg the swing momentum of this stainless steel toy must be incredible somewhere between delightful agony and excruciating ecstasy.

Stretcher

Mister B Stainless Steel 120mm Ball Stretcher 199€

If you love low hangers but are not quite there yet, getting the Mandax Ultimate Ball Stretching System from Mister B is the way to approach your project for 2015. The system has three adjustable bars which will stretch your balls up to 18cm. A nice added feature is the it is equipped with a 2mm and a 4mm socket to attach to an electro box. It is only a monopole but with a Y-adapter and something from E-Stim systems premium range, you will have loads of fun.

Stretching Set

Mandax Ultimate Ball Stretching System 169€

Erostek ET312b

Vendor: Mr S (USA) and Regulation (EU)

The Erostek ET312b

Since the ET312b is sometimes considered not to be compliant with EU electronic device regulations, if shipping it to the EU I highly recommend ordering it from Regulation. I had several friends’ boxes ordered from the USA seized by customs.

Construction

The Erostek ET312b is probably one of the oldest e-stim power boxes which is still on the market. Its design has almost become iconic, the characteristic beige box having been featured on so many porn pics over the last decades – until Erostek changes the design a few years ago to a more stylish black. This design change lead to some discussion in my testee panel. Some – like me – prefer the new look because it fits the style of most playrooms and scene atmospheres. Other likes that the old box popped out and is indeed a classic. If you have an old box and want the new look, there is a kit to exchange the case – or do it the Trikoot way and use alkyd based paint to color the case in your signature color. The case has a rough texture which forgives finger prints while the control panel is still glossy. The box measures 205x157x65mm making is the largest of the e-stim power boxes. This is largely due to the lead acid battery which has a capacity of up to 48h. But which also makes the box with a weight 1.200g making it the heaviest box on the market. When the battery gets old, it can be replaced with a little bit of electro technical know-how but unlike the other boxes which are powered by 9v block batteries, if it runs out mid-scene in a club you can’t replace the battery instantly but have to use the power supply unit. Generally speaking, Erostek sales almost everything as spare parts. So if something gets broken and you are handy, you can fix it yourself.

Detail of the Control Panel

The entire front of the box is taken up by the control panel. The left third is for display information. On top there is a two-line green backlight LCD. Below it there is a hole through which you can adjust the screen’s contrast using a fine screw-driver (which is only necessary in extreme weather conditions) and two red LEDs which flash when channel A and/or B is firing. In the middle there are the main control buttons. The first horizontal pair are the grey buttons Menu and ok. Pressing Menu will get you to the advanced setting (see below) and OK will select the currently displayed menu point. Next to them are white buttons labeled Up and Down. In the menu they are used for navigating. Outside the menu, they are used to scroll through the box’s programs. Next to the Up key there are three rotary controls. The first is “Multi Adjust” to manipulate the current program, the other two are controlling the power level of channel A and B. Below the three knobs there is the power button which starts up the box, the link jack for connecting the ET312b with a computer, 3.5mm jack line-ins for the microphone and another one labeled “Audio”. I have tried the microphone and music on both jacks and got the same effects so I am not sure why there are two. Theoretically the mic should create very faint sensations when plugged into Audio but I did not experience that. Next are the two 3.5mm outputs for channel A and B and last the input for the power supply unit.

Detail of the Display

The ET312b comes with a few accessories: The power supply with adaptors for USA, EU and Canada, two 1.2cm long 3.5mm jack to 4mm banana plug leads, a 2m long line-in cable to connect you phone or MP3 player with the power box, a microphone with a 2.4m long cable and holdfast with a small glue patch to permanently position it somewhere in your playroom (though the holdfast is so flimsy and the glue to weak, I use adhesive tape to position and fix the mic in a suitable position for each scene) and an informative manual. What the ET312b doesn’t come with – unlike most other modern premium e-stim boxes – is a nice carrying case.

Playing with the Erostek ET312b

The ET312b is used like every other box. After pressing the power button a 3 second self-test is run after which the battery’s power level is displayed. After that connect the leads to the electrodes, connect them to the box, select a program and slowly turn the channel’s intensity up until the sub starts to feel someting.  The ET312b has 18 resp. 24 different programs. The last 6 programs are custom once which can be transferred onto the box using the ErosLink software. After selecting a new program there is a short ramping up period. This is to prevent too intense stimulation for the case the power level has not been turned down before the change. This is necessary because every program feels differently intense on the same power output level. The sensation of the programs can be adjusted by turning the Multi Adjust knob.

Program name Sensation Multi Adjust Effect
Waves Wave-like sensation with random wave length and intensity Speed of waves
Stroke Steady wave form on both channels Wave length
Climb Pulsed sensations that increases up to the maximum selected  intensity Climbing speed
Combo Sensation like wave program but changing between the channels Length of stimulation on both channels, simultaneous stimulation when turned all the way up
Intense Unmodulated waves Wave length and feel from soft to spiky
Rhythm Pulses of increasing sensation which’s output will increase each cycle Pulse length
Audio 1 Transforms audio input into same stimulation on both channels Selects input’s sensitivity level: Turn Multi Adjust until LEDs are flashing than start adjusting the channels’ intensity
Audio 2 Transforms left side audio signal into stimulation for channel A and right side for channel B
Audio 3 Transforms left side audio signal into stimulation for channel A and right side for channel B but process the waveform in a unique way
Split Channel A: Stroke, channel B: Waves Speed of waves & wave length
Random 1 Mixes patterns from the first 6 programs for a unique stimulation Alters selection variable
Random 2 Random stimulations at changing intervals No effect
Toggle Constant output on alternating channels Changing speed between the channels
Orgasm Ramping up pulses alternating between the channels Pluse frequency
Torment Brief stimulation bursts with random pattern and random breaks Pluse frequency
Phase 1 Allows for stimulation to be felt in three electrodes on the body Speed of changing between channels
You need special tri-phase cables to experience these channels
Phase 2 Adds changing intensity
Phase 3 Three programs on only two channels

With an output of 80 micro coulombs per pulse the ET312b is the most powerful unit in the market. Through the powerful battery it delivers this output regardless if running on battery or using the external power supply. While most subs do not really need the full power on most boxes, if you are having a real pain pig over, having the extra power in the backhand without having to change the electrodes is good.

Just like the E-Stim Systems 2b, the ET312b supports tri-phasing. This means using a special cable the stimulation can be felt at three areas using only a two channels. Since for this kind of stimulation there is an interaction between all three poles, never use it above the waist!

The Microphone which comes with the ET312b

What sets the ET3212b apart from all other power boxes currently available on the market are the advanced features which you can access through the menu button. These features can be used to customize the power box to your personal preferences like:

  • Turning the ramping after a program change on and off
  • Selecting which two programs should be run in split mode
  • Selecting which program the ET312b should be the default after starting up
  • Choosing a power level
  • Change the feeling of programs

As already mentioned Erostek also sells soft- and hardware to program the ET312b. Through the Eroslink software you can write new programs, alter existing programs also on the fly or choose from 25 new programs to fill the six “hidden” program slots in the menu. I have never used the software myself but tried it at a friend for a short time. While it is powerful, you need a lot of understanding how e-stim works (or trying out a lot on the fly) to really develop new routines. And while the interface is functional, it looks very Windows 95 – which explains why the connection to the box is done via a serial port… Especially if you look for remote control over the internet, take a look at the E-Stim System 2b.

Last but not least: Because the ET312b has been on the market for so long and through the advanced features is considered a “pro box” (even though most people probably will never use the features), sooner or later most e-stim enthusiasts will buy one of these boxes. These makes the ET312b the ideal choice for subs who host traveling tops because it is likely that the top will already know how to use the power box without an introduction.

Conclusion: Most powerful, most sophisticated, most widely used but most complicated power box.
Pro Cons Where to get Price
Powerful Advanced setting takes time to master Mr S $599.99
Interesting programs Outdates remote control program Regulation £675
Tri-phase ready ErosLink Software with Hardware Connector £79.99
Highly customizable

Vyper XL

The E-Stim Systems Vyper XL

Vendor: E-Stim System

Construction

The basis of the Vyper is a rectangular piece of 8mm thick, black, polished plastic which measures 220x145mm. On top of this base plate two pairs of golden sheet electrodes are mounted, each sheet measuring 80x28mm. Using four 55mm long M6 screws a clear 110x110mm and 5mm thick plastic plate can be fixed on top of the base plate and tightened using butterfly nuts. There are two of these plates so the entire base plate can be covered. Depending on the bottom’s dick size, one or two places can be used to torment his dick. At the bottom of the clear plates, the same electrode layout as on the base plate can be found.

There are four terminal pairs on the top and two pairs on the bottom below the upper pair of a compression plate. There is a connection between the upper and lower terminals so even if you don’t attach leads to the lower ones, stimulation will come from the lower electrodes.

Detail of a Terminal a Screw for Tightening the Upper Plate onto the Dick

On top of the board there is a little eyelet through which either rope can be threaded or a carbineer attached. Since the total weight of the toy is 650g, it is a good idea to have something which keeps the Vyper from moving around and thus putting the dick in an unwanted location.

For more compact play luggage E-Stim Systems also offers a short version called “Vyper 2” which is half the size of the Vyper XL reviewed here.

Playing with the Vyper XL

There are two ways of wiring the Vyper: The quick and easy and the more elaborate way. The quick and easy way is always connecting a yellow and a black terminal to one channel of your electro powerbox. This way the simulation direction is left and right and you rule out any chance of short-circuiting your power box. For the more elaborate way, you connect the two alike-colored terminals above each other for a top-bottom-stimulation. In this case you need to place small rubber patches where the top terminals connect to the lower electrodes. Otherwise you will short-circuit your power box! While most premium e-stim boxes can withstand this stress, it is not good for the hardware. Also, you won’t feel almost any stimulation regardless of the power level. Furthermore, make sure that the dick touches the panel you connect the box to. This is especially important with less well-endowed subs.

Detail of how the Upper Terminal connect to the Lower Sheet Electrodes

After the technicalities have been taken care of, now on to the fun stuff. The sensation produced by the Vyper actually depends on the dick size. Since the electrodes have very small mass, the more of the dick covers them, the smoother is the sensation. This leads to interesting mind games: Either endure the dick being pressed more severly for a smother sensation or take less pressure but more stingy e-stim. When compressing the dick, taking it slow and not to extremes is wise. Ironically the cavernous bodies are more sensitive to compression than the balls so do not tighten the top plates to the max. It is actually useful to add a nut or two as a safety barrier. The sensation can be made a bit smoother using conductive lube.

Through the Vyper’s unique layout, it takes a bit of time and experimenting which programs wired which way works best for your sub. For me, programs I never found enjoyable suddenly made sense using the Vyper XL. Playing a little bit with pressure during play – like tightening the lower or loosening the upper plate to “squeeze” an orgasm out of the sub – is also a lot of fun. One sub even managed to cum inside the Vyper just from e-stim.  If you have a “larger” sub, taking single plates off opens a hole new range of play possibilities. Either just fry the glans or polish and sound it while the shaft gets all the stimulation.

Details of a Sheet Electrode Pair

For even more varied CBT scenes, the Vyper can be used without the top plates. Simply use rope or elastic bands to keep the dick pressured against the base plate’s poles while you torment the shaft and glans with (e-stim) pinwheels, pegs, a violet wand or impact play. You can even use wax though it is a pain in the ass to clean off!

Speaking of cleaning, after play spray the exposed areas with a sanitizer and wipe it off afterwards. If you used large amounts of lube, your sub came all over the place or through other means it has gotten completely messy/ dirty, soak it in warm water with dish soap and use a soft sponge. However, take extra care when trying. With so many little gaps and holes, water can linger and cause corrosion!

Conclusion: Unique, little bit bulky design for interesting new, rather stingy e-stim sensations.  
Pro Cons Where to get Price  
Unique electrode layout A bit bulky and cumbersome Vyper £99
Vyper XL £149.99
Great CBT board even without e-stim Especially smaller dicks must be placed exactly in the middle

ElectraStim Classic Plug

Vendor: ElectraStim

Construction

The Classic Plug is a bi-polar plug made by ElectraStim. It is cone-shaped and comes in three sizes.

Name Maximum Diameter Insertable Length
Beginner’s 30mm 56mm
Midi 40mm 70mm
Maxi 50mm 85mm

The ElectraStim Maxi Classic Plug

Unlike the bi-polar anal electrodes made by E-Stim Systems the two poles are split horizontally, with the ElectraStim Classic Plug they are split vertically. Two polished tapered aluminum halves are connected using acrylic which isolates the two poles. The junction is very well-made with almost no burr so unlike other, cheap electrodes which mimic this style there is not injury risk when inserting the electrode. Around the base two rubber bands are wrapped which provide good grip even with lubey fingers. Theoretically they provide some level of isolation when inserting the plug or taking it out even when currency is running through the plug. However, first I strongly advise against moving the plug while e-stim is one because the alteration of the contact surface can lead to nasty spikes in the felt stimulation. Also when you really grip the base, the fingers will make contact with the aluminum, making it likely currency will flow through your fingers. If you still want to pull or push the plug while it is energized, wear isolating gloves.

To connect the plug with your power box there is a socket for 2mm pin connectors at the bottom of each pole.

Detail of the Two 2mm Sockets

While I have gotten the Maxi to review, the construction and handling of the toy are the same for all three sizes. Due to the smaller amount of mass in the sensations when playing can feel a bit different.

Playing with the Classic Plug

The shape of the Classic Plug is the same like most traditional butt plugs which means it gradually opens up the sphincter which makes for easy insertion. To ensure good conductivity I recommend water-based lube. I personally prefer Swiss Navy which has good conductive properties.

Because the two poles are facing each other instead of being above each other Classic Plug offers unique sensations compared to my other bi-polar e-stim plugs. The bad news first: Naturally due to the poles’ position there is no fucking sensation possible. When I started reviewing the plug I went through all the programs on my wide selection of e-stim power boxes. Some of my favorite ones I did not like at all, others I never considered to be fun suddenly became interesting. So when you have gotten only E-Stim System Premium Anal Electrodes, take a look at this one for more varied play options.

Detail of the Isolation Rings Around the Base

Another good news is: All the sensation felt is just centered at the sphincter which leads to an intense stimulation. Even at low intensity settings, strong sensations can be felt. So this plug is good for nuanced play as well as for more tormenting scenes. An e-stim sadist friend of mine grew very fond of the small plug because it gave his sub who maxed all his power boxes a new challenge.

However, what spoils the plug a bit for me is the lack of 2mm pin low profile leads. I searched the internet and could not find any. So sitting on the plug is not possible, lying on it is a bit of a challenge, both will increase the likelihood of lead fracture which limits the bondage layouts I really want to incorporate this electrode in.

Conclusion: Easy to insert bi-polar anal electrode for focus sphincter stimulation
Pro Cons Where to get Price
Interesting pole positions Location of the sockets unpractical for many bondage layouts ElectraStim Beginner’s: 99€
Shape makes it easy to insert Midi: 115€
Maxi: 129€
Good build quality
Disclaimer: This toy was sent to me by ElectraStim for an honest and unbiased review.

SensaVox

The ElectraStim SensaVox E-Stim Power Box

Vendor: ElectraStim

It is becoming a bit of a tradition that after each E-Stim Special I am getting inundated with questions about toys I have not reviewed yet. Despite having already reviewed half a dozen different power boxes there are still popular models out there which I have not covered. This review should answer a few of these questions.

Construction

Like most premium e-stim power boxes the SensaVox comes in a sturdy black carrying case. The inside is lined with foam which has cut outs for the power box, a (spare) battery, the audio adapter and space for cables and accessories. If use the SensaVox just with batteries when playing outside your playroom there is enough space for some pad electrodes, conductive loops, e-stim sounds and even a small bi-polar electrode. But when you open the case for the first time, it is packed with stuff: First there are the essential things like the actual power unit, two 2mm right-angle plug to 2mm pin leads, a 9V battery and an adaptable power supply for all four major socket systems (EU, UK, USA and Japan). The explore the audio features it comes with a line-in cable, a 3.5mm female-to-female adaptor for enhancing the line-in’s cable length, a microphone, a CD-ROM with audio files and manuals in multiple languages. Of cause there is printed a full colour manual in English. For a detailed overview of the box’s content read my unboxing.

The ElectraStim SensaVox with all the Standard Accessories

The SensaVox is one of the larger power boxes measuring 145x81x34mm and weighing 245g equipped with a battery and ready for play. The case is made out of a black polymer with now flex so it has a quality feel. The control panel is charcoal coloured with a bit silver dazzle.

In the top left corner there is the power button. In the left corner you find the Boost button which will increase the output power by 25% as long as it is pressed. Between the two buttons is the modify knob which modifies the selected programs. Below the two buttons at the top there is a red LED segment display and a knob below them on each side. They are to control and display the output level of the two channels. If the channel fires a red LED below the know flashes. Just below the middle of the front there are two arrow buttons flanking a blue LED segment display which are for selecting and indicating the program which the two channels will fire.

The SensaVox with all LED Indicators and Display Turned On

The socket for the power supply is located on the left side of the SenvaVox. On top are the 2mm sockets to plug in the leads for the two channels. On the right side are two 3.5mm sockets. The left one is for the line-in, the right one is the microphone input. The back side is covered with a sticker which not only labels the sockets on the side but also provides an overview which program corresponds with the program number. On the bottom of the back there is the battery compartment.

Playing with it

To get the box ready for action, press the power button, wait 2 seconds for the self-test to finish and then you are good to go. For safety reasons connect the leads first with the electrodes and then plug them into the box. The SensaVox will always boot to the first program. Also, regardless of the position of the knobs controlling the channels’ intensity or the modification they are always (re)set to zero when starting the box or changing the channel. When the channels’ intensity is zero, you can twist the knob counter clock-wise without changing the intensity. I would recommend always turning the know to the 6-o’clock position which with all my other power boxes is associated with the zero position. When starting from this position it takes four complete turns from 0 to the max level of 99. So when starting out at the zero position you have some rough idea in the intensity region you are by just feeling the indicator of the knob. When you turn the knob to quickly the box won’t recognize the input so pace yourself a bit. When you want to punish your sub quickly, press the boost button which will increase the output power on both channel by 25% as long as the button is pressed.

Program Number Program Name Sensation Modify Know Effect
P1 Smooth Continuous output with a prickling sensation Changing of the frequency
P2 Caress A synchronous pulse on both channels which sweeps up and down Adjusting the sweep rate cycle between 0.25 and 20 sec
P3 Swinger An asynchronous pulse on both channels which sweeps up and down Adjusting the sweep rate cycle between 0.25 and 20 sec
P4 Burst Burst of selected intensity and then dropping to zero again. The intensity can only be adjusted during the burst Adjusting the burst rate cycle between 0.25 and 10 sec
P5 Alternate Alternating firing of the channels. The intensity can only be adjusted when the channel is active Adjusting of the alteration rate cycle between 0.25 and 10 sec
P6 Stepper A pulse increasing/ decreasing in three steps. While one channel increases the other decreases. Variation of the pulse frequency
P7 Shooter Channels are shooting alternating pulses Number of pulses per burst can be selected between 1 and 72.
P8 Auto Climb Channel 1: Once intensity is selected, the output drops to zero and starts climbing to the selected level, keeps it for 2 sec, drops to zero and start over.

Channel 2: Continuous output.

Climbing rate per intensity level can be adjusted between 0.05 and 5 sec
P9 Climax The pulse during starts out with a high frequency and low intensity and slows down with higher intensity at the end of the cycle. Cycle rate can be adjusted between 5 sec and 6 ½ min
A1 Channel 1 Modulate Channel 1 fires according to the microphone input Increases sensitivity
A2 Channel 2 Modulate Channel 2 fires according to the microphone input Increases sensitivity
A3 Both Channels Modulte Both Channels fire according to the microphone input Increases sensitivity
L1 Channel 1 Modulate Channel 1 fires according to the line-in input Increases sensitivity
L2 Channel 2 Modulate Channel 2 fires according to the line-in input Increases sensitivity
L3 Both Channels Modulte Both Channels fire according to the line-in input Increases sensitivity

Detail of the Sockets for the Two Channels with the Adaptor to use 3.5mm Leads plugged into Channel 2

The SensaVox is one of the more powerful power boxes out there. While using the same electrodes with other power boxes I have to set their intensity to between 30% and 40% of the max output before the stimulation becomes noticeable. With the SensaVox this was the case already at between 10% and 15%. I especially enjoyed playing mind games with the boost button. It is a great basis for barter games: Either press it as long as the sub agrees to something or leave him the choice of increasing the intensity or feeling the boost. The max output compares to most elaborate power boxes but the low threshold allows for a fine adjustment and varied play.

Detail of the Sticker with the Program Names

Having been on the market for almost 10 years the programs and modification possibilities are not as sophisticated as on a way larger and more expensive ET312b. It does also not feature fancy stereo audio processing or remote control over the internet as the E-Stim System 2b. Still I love the SensaVox very much. It has no full text display which requires pressing multiple buttons at the same time to induce different levels of modification. It is easy to use and thus easy to explain to new top. The programs are fun and cover all the desired sensations. Neither I nor my testee panel really felt it was missing a stimulation pattern.

One thing which puzzled all testee panel member and me were the different audio sockets for the microphone and the line-in. Cheekily we plugged the microphone into the line-in socket and vice versa – and didn’t recognize a difference. So if you ever spotted a difference between the two sockets, please send me an e-mail.

Conclusion: Powerful and easy to use power box with many way to modify the stimulation.
Pro Cons Where to get Price
Powerful and finely adjustable Knobs don’t react when turning quickly ElectraStim

Mr S

389€

$448.95

Boost button
Diverse programs
Audio Input
Comes with many accessories for audio play
  • 9ee6292c41ad2ef691c9e90a8a7a2b8a

    9ee6292c41ad2ef691c9e90a8a7a2b8a